Power System & Electrical Design Courses — Taught by Practising Engineers
Live, instructor-led training in ETAP, PSCAD, PSS®E, DIgSILENT PowerFactory, CDEGS, PVsyst, Substation Design, Detailed Electrical Design and AutoCAD Electrical — built on real project data from 1,000+ power system studies delivered across 50+ countries.
- Live instructor-led sessions
- Recordings uploaded within 24 hrs
- Lifetime access
- Power Projects certificate
- WhatsApp community support
Choose Your Power Projects Training Course
From power system simulation software to substation earthing, solar PV and complete electrical design deliverables — every course uses real project models and industry standards.
ETAP Course
Master ETAP for industrial power system analysis — from fundamentals to advanced studies, with manual calculations behind every module.
- Load flow & short circuit (IEC 60909)
- Relay coordination for LV, MV & HV
- Arc flash to IEEE 1584-2018 / NFPA 70E
- Harmonics (IEEE 519), motor starting, transient stability
PSCAD Course
EMT simulation for insulation coordination and grid compliance studies — taught by engineers who deliver these studies for utilities and renewable developers.
- Switching & lightning surges, TOV, SFO, FFO
- TRV, VFTO & ferro-resonance analysis
- LVRT / HVRT grid compliance for renewables
- IEC 60071, IEEE C37 & CEA standards
PSS®E Course
Load flow, dynamic and grid compliance studies on PSS®E V35 — with real 250 MW solar, 500 MW wind and national-grid case studies.
- Network modelling, load flow & short circuit
- N-1 / N-2 contingency analysis
- Dynamic modelling (DYRE) & transient stability
- Python scripting for PSS®E automation
DIgSILENT PowerFactory Course
From modelling fundamentals to protection, harmonic, stability and grid compliance studies — covering both RMS and EMT simulation in one tool.
- Load flow, IEC/ANSI short circuit & protection
- Harmonic load flow & frequency scan
- RMS stability, dynamic & EMT simulation
- DPL scripting & automation
CDEGS Training
Substation grounding and Earth Potential Rise (EPR) design using CDEGS — from soil resistivity modelling to standards-compliant grounding study reports.
- Multi-layer soil modelling with RESAP
- Ground grid design using MALT & MALZ
- Step & touch potential, GPR & contour plots
- IEEE 80, IEC 61936-1, IEC 60364 & IS 3043
Substation Design Course
How substations are designed, engineered and integrated — technical concepts plus the practical engineering workflow used on real utility and industrial projects.
- Design philosophy, AIS & GIS substations
- Transformer, switchgear, CT/PT & busbar selection
- Protection, earthing & lightning protection
- SLDs, equipment layout & case studies
PVsyst Course
Solar PV design, simulation and energy yield analysis — from irradiance fundamentals to a complete real-time solar project report.
- Grid-connected, standalone, pumping & bifacial design
- Inverter & module selection, DC/AC ratio
- Loss diagram, near & far shading analysis
- P50 / P90 energy evaluation & reports
Detailed Electrical Design Course
The full electrical design lifecycle — Concept, FEED, Detailed Design and EPC — with a real assignment and instructor review in every module.
- Load list, max demand, transformer & DG sizing
- Key SLD and metering & protection SLD
- Cable, switchgear, UPS, battery & CT/VT sizing
- Substation layout, cable tray, LPS & lighting design
AutoCAD Electrical Course
Industry-oriented electrical drafting — the drawings used on real detailed design projects, from SLDs to substation and earthing layouts.
- SLD & protection SLD preparation
- Control room GA & outdoor layouts
- Cable routing & earthing layouts
- Layers, annotation, plotting & drawing checklist
Not Sure Where to Start? Follow a Path
Pick the path that matches your role — each builds from fundamentals to the studies and deliverables clients actually ask for.
Industrial Power System Studies
For EPC, oil & gas, data centre and industrial plant engineers.
Renewable Grid Integration
For solar, wind and BESS engineers working on grid connection and compliance.
Substation & Earthing Engineer
For substation, HV and earthing engineers on utility and EPC projects.
Electrical Design Engineer
For graduates and engineers moving into design and consultancy roles.
Which Course Fits Your Work?
Course | Best for | Key studies / deliverables | Format |
|---|---|---|---|
ETAP | Industrial & distribution systems | Load flow, short circuit, relay coordination, arc flash, harmonics, motor starting | 100+ live hrs, 9 modules |
PSCAD | EMT & HV transient studies | Insulation coordination, TRV, VFTO, ferro-resonance, LVRT/HVRT | Live, 8 modules |
PSS®E | Transmission planning & grid compliance | Load flow, contingency, dynamic models, transient stability, Python automation | 100+ live hrs, 10 modules |
DIgSILENT | All-in-one RMS + EMT studies | Protection, harmonics, RMS/EMT stability, grid compliance, DPL scripting | 100+ live hrs, 12 modules |
CDEGS | Substation earthing & EPR | Soil models, grid resistance, GPR, step & touch voltages | Live, real substation cases |
Substation Design | Substation engineering fundamentals | AIS/GIS concepts, equipment selection, protection & earthing, SLDs | Live, 5 modules |
PVsyst | Solar PV design & energy yield | System design, loss & shading analysis, P50/P90 reports | 8 hands-on sessions |
Detailed Electrical Design | Concept-to-EPC design deliverables | Load list, SLDs, sizing calcs, specs, TBE, layouts, LPS, lighting | 25+ modules, assignments |
AutoCAD Electrical | Electrical drafting | SLDs, GA drawings, cable routing & earthing layouts | 8+ modules, 1:1 support |
Training Built on Real Engineering Work
Power Projects is a practising power system consultancy — our trainers teach the same studies they deliver to clients.
Practising Engineers as Instructors
Learn from engineers who run load flow, protection, EMT, earthing and design studies on live projects every day.
Live, Instructor-Led Sessions
Interactive classes with demonstrations, case studies and Q&A — not just pre-recorded videos.
Real Project Data
Practise on models drawn from 1,000+ completed studies — solar, wind, BESS, substations, refineries and data centres.
Lifetime Recording Access
Every session is recorded and uploaded within 24 hours — revisit any topic, anytime, at your own pace.
Community & Expert Support
Dedicated WhatsApp groups and live Q&A sessions with industry engineers to clear doubts quickly.
Power Projects Certificate
Earn a certificate of completion from a consultancy established in 2006 with clients across 50+ countries.
Designed for Every Stage of an Electrical Career
Whether you are a graduate or a senior engineer, there is a course that moves you forward.
Frequently Asked Questions
Are the courses live or pre-recorded?
Do I need prior experience with the software?
Do I need to buy a software licence?
Will I receive a certificate?
Can I enrol in more than one course?
Do you offer corporate or on-site training?
How soon will I hear back after registering?
Ready to Start Your Power Projects Training?
Tell us which course you're interested in and we'll send you the fees, detailed syllabus and next batch schedule within 24 hours.
- Live instructor-led sessions by practising engineers
- Real project models and case studies
- Lifetime access to all session recordings
- WhatsApp community and expert Q&A support
- Power Projects certificate on completion
Register Your Interest
Get batch dates, syllabus & course fees within 24 hours
🔒 Your details are kept private and used only to respond to your enquiry.