Power Projects Training

Power System & Electrical Design Courses — Taught by Practising Engineers

Live, instructor-led training in ETAP, PSCAD, PSS®E, DIgSILENT PowerFactory, CDEGS, PVsyst, Substation Design, Detailed Electrical Design and AutoCAD Electrical — built on real project data from 1,000+ power system studies delivered across 50+ countries.

Load FlowShort CircuitRelay CoordinationArc FlashInsulation CoordinationGrid ComplianceSubstation EarthingSolar PV DesignElectrical Design
9Professional courses
1000+Real projects completed
50+Countries trained
2006Established since
  • Live instructor-led sessions
  • Recordings uploaded within 24 hrs
  • Lifetime access
  • Power Projects certificate
  • WhatsApp community support
Our Courses

Choose Your Power Projects Training Course

From power system simulation software to substation earthing, solar PV and complete electrical design deliverables — every course uses real project models and industry standards.

Power System Studies100+ live hrs

ETAP Course

Master ETAP for industrial power system analysis — from fundamentals to advanced studies, with manual calculations behind every module.

  • Load flow & short circuit (IEC 60909)
  • Relay coordination for LV, MV & HV
  • Arc flash to IEEE 1584-2018 / NFPA 70E
  • Harmonics (IEEE 519), motor starting, transient stability
9 modules800+ recorded hrsIEEE & IEC
Power System StudiesLive EMT training

PSCAD Course

EMT simulation for insulation coordination and grid compliance studies — taught by engineers who deliver these studies for utilities and renewable developers.

  • Switching & lightning surges, TOV, SFO, FFO
  • TRV, VFTO & ferro-resonance analysis
  • LVRT / HVRT grid compliance for renewables
  • IEC 60071, IEEE C37 & CEA standards
8 modulesReal IC case studiesUtility reports
Power System Studies100+ live hrs

PSS®E Course

Load flow, dynamic and grid compliance studies on PSS®E V35 — with real 250 MW solar, 500 MW wind and national-grid case studies.

  • Network modelling, load flow & short circuit
  • N-1 / N-2 contingency analysis
  • Dynamic modelling (DYRE) & transient stability
  • Python scripting for PSS®E automation
10 modulesPSS®E V35Python templates
Power System Studies100+ live hrs

DIgSILENT PowerFactory Course

From modelling fundamentals to protection, harmonic, stability and grid compliance studies — covering both RMS and EMT simulation in one tool.

  • Load flow, IEC/ANSI short circuit & protection
  • Harmonic load flow & frequency scan
  • RMS stability, dynamic & EMT simulation
  • DPL scripting & automation
12 modulesSolar, wind & industrialFree demo version
Substation & EarthingLive sessions

CDEGS Training

Substation grounding and Earth Potential Rise (EPR) design using CDEGS — from soil resistivity modelling to standards-compliant grounding study reports.

  • Multi-layer soil modelling with RESAP
  • Ground grid design using MALT & MALZ
  • Step & touch potential, GPR & contour plots
  • IEEE 80, IEC 61936-1, IEC 60364 & IS 3043
RESAP · MALT · MALZSESTLC · HIFREQ · SESShield
Substation & Earthing5 core modules

Substation Design Course

How substations are designed, engineered and integrated — technical concepts plus the practical engineering workflow used on real utility and industrial projects.

  • Design philosophy, AIS & GIS substations
  • Transformer, switchgear, CT/PT & busbar selection
  • Protection, earthing & lightning protection
  • SLDs, equipment layout & case studies
Live technical sessionsReal project workflow
Solar PV8 hands-on sessions

PVsyst Course

Solar PV design, simulation and energy yield analysis — from irradiance fundamentals to a complete real-time solar project report.

  • Grid-connected, standalone, pumping & bifacial design
  • Inverter & module selection, DC/AC ratio
  • Loss diagram, near & far shading analysis
  • P50 / P90 energy evaluation & reports
Real project in Session 8All levels
Electrical Design25+ modules

Detailed Electrical Design Course

The full electrical design lifecycle — Concept, FEED, Detailed Design and EPC — with a real assignment and instructor review in every module.

  • Load list, max demand, transformer & DG sizing
  • Key SLD and metering & protection SLD
  • Cable, switchgear, UPS, battery & CT/VT sizing
  • Substation layout, cable tray, LPS & lighting design
IEC · IEEE · BSFlexible module selection
Electrical Design & CAD8+ modules

AutoCAD Electrical Course

Industry-oriented electrical drafting — the drawings used on real detailed design projects, from SLDs to substation and earthing layouts.

  • SLD & protection SLD preparation
  • Control room GA & outdoor layouts
  • Cable routing & earthing layouts
  • Layers, annotation, plotting & drawing checklist
1:1 doubt supportOnline + recorded
Learning Paths

Not Sure Where to Start? Follow a Path

Pick the path that matches your role — each builds from fundamentals to the studies and deliverables clients actually ask for.

Industrial Power System Studies

For EPC, oil & gas, data centre and industrial plant engineers.

ETAP → DIgSILENT → PSCAD

Renewable Grid Integration

For solar, wind and BESS engineers working on grid connection and compliance.

PVsyst → PSS®E → PSCAD

Substation & Earthing Engineer

For substation, HV and earthing engineers on utility and EPC projects.

Substation Design → CDEGS → PSCAD

Electrical Design Engineer

For graduates and engineers moving into design and consultancy roles.

AutoCAD Electrical → Detailed Design → ETAP
Quick Comparison

Which Course Fits Your Work?

Course
Best for
Key studies / deliverables
Format
ETAP
Industrial & distribution systems
Load flow, short circuit, relay coordination, arc flash, harmonics, motor starting
100+ live hrs, 9 modules
PSCAD
EMT & HV transient studies
Insulation coordination, TRV, VFTO, ferro-resonance, LVRT/HVRT
Live, 8 modules
PSS®E
Transmission planning & grid compliance
Load flow, contingency, dynamic models, transient stability, Python automation
100+ live hrs, 10 modules
DIgSILENT
All-in-one RMS + EMT studies
Protection, harmonics, RMS/EMT stability, grid compliance, DPL scripting
100+ live hrs, 12 modules
CDEGS
Substation earthing & EPR
Soil models, grid resistance, GPR, step & touch voltages
Live, real substation cases
Substation Design
Substation engineering fundamentals
AIS/GIS concepts, equipment selection, protection & earthing, SLDs
Live, 5 modules
PVsyst
Solar PV design & energy yield
System design, loss & shading analysis, P50/P90 reports
8 hands-on sessions
Detailed Electrical Design
Concept-to-EPC design deliverables
Load list, SLDs, sizing calcs, specs, TBE, layouts, LPS, lighting
25+ modules, assignments
AutoCAD Electrical
Electrical drafting
SLDs, GA drawings, cable routing & earthing layouts
8+ modules, 1:1 support
Why Power Projects

Training Built on Real Engineering Work

Power Projects is a practising power system consultancy — our trainers teach the same studies they deliver to clients.

Practising Engineers as Instructors

Learn from engineers who run load flow, protection, EMT, earthing and design studies on live projects every day.

Live, Instructor-Led Sessions

Interactive classes with demonstrations, case studies and Q&A — not just pre-recorded videos.

Real Project Data

Practise on models drawn from 1,000+ completed studies — solar, wind, BESS, substations, refineries and data centres.

Lifetime Recording Access

Every session is recorded and uploaded within 24 hours — revisit any topic, anytime, at your own pace.

Community & Expert Support

Dedicated WhatsApp groups and live Q&A sessions with industry engineers to clear doubts quickly.

Power Projects Certificate

Earn a certificate of completion from a consultancy established in 2006 with clients across 50+ countries.

Who Should Attend

Designed for Every Stage of an Electrical Career

Whether you are a graduate or a senior engineer, there is a course that moves you forward.

Electrical engineering students & fresh graduates
Power system & protection engineers
EPC project & design engineers
Substation & earthing engineers
Renewable energy & grid compliance engineers
Utility & transmission planning engineers
Commissioning, testing & O&M engineers
CAD designers & consultancy engineers
FAQ

Frequently Asked Questions

Are the courses live or pre-recorded?
All courses are delivered as live, instructor-led sessions. Every session is recorded and uploaded within 24 hours, so you can catch up if you miss a class and revisit topics anytime.
Do I need prior experience with the software?
No. Each course starts from fundamentals and builds step by step to advanced studies and real project exercises. Beginners, students and working professionals are all welcome.
Do I need to buy a software licence?
Not to get started. Several tools offer free demo, trial or lite editions (e.g. DIgSILENT demo, PVsyst trial, PSCAD Free/Lite edition) that are sufficient for training. We guide you through setup at the start of each course.
Will I receive a certificate?
Yes — every participant receives a Power Projects certificate of completion. Some courses (such as PSS®E) issue the certificate on completion of the course and project assignments.
Can I enrol in more than one course?
Yes. Many engineers combine courses along a learning path — for example ETAP with DIgSILENT, or PVsyst with PSS®E. Mention the courses you're interested in on the form and we'll share combined fees and schedules.
Do you offer corporate or on-site training?
Yes. We deliver customised corporate training for utilities, EPC contractors and consultancies, online or on-site. Use the form below and mention your team size and topics.
How soon will I hear back after registering?
Our team responds within 24 hours with the course fees, full syllabus and upcoming batch dates.
Course Registration

Ready to Start Your Power Projects Training?

Tell us which course you're interested in and we'll send you the fees, detailed syllabus and next batch schedule within 24 hours.

  • Live instructor-led sessions by practising engineers
  • Real project models and case studies
  • Lifetime access to all session recordings
  • WhatsApp community and expert Q&A support
  • Power Projects certificate on completion
Phone / WhatsApp: +91 90423 42912

Register Your Interest

Get batch dates, syllabus & course fees within 24 hours

    🔒 Your details are kept private and used only to respond to your enquiry.